Calibers Featured Include:
Column 1: The serial number itself (including prefix). Column 2: The beginning serial number in that book. Column 3: The beginning date for that book. If there is only one date listed after the serial numbers in column 2 and/or 2, all of those numbers were manufactured on that same day. Column 4: End date for that book. Jun 03, 2017 The rifle shows excellent plus condition. Marked on the left side, 'DPMS Panther Arms - CAL.223/5.56mm MOD. A-15 - F280351'. The rifle shows the adjustable M16 Carry Handle target and fixed sights with adjustable tactical stock, muzzle break, one full size original magazine, and M16 style front grip forestock. Serial number F280351.
.204 Ruger, .22LR, 5.56 x 45mm, .223 Rem., 6.8mm Rem. SPC, 7.62 x 39mm, .243 Win., .260 Rem., .308 Win., .300 Rem. SAUM.
www.dpmsinc.com 1-800-578-DPMS
SERIAL NUMBER INFORMATION
Record the serial number of your DPMS/Panther Arms firearm!
(When holding the firearm the serial number will be found on the left side of the firearm, stamped on the magazine well):
and a description of it:
Make a copy of this operations manual and proof of purchase/sales record. Maintain these items in a secure safe or fireproof container. These materials will be necessary if the firearm is damaged, stolen or returned to DPMS/Panther Arms for warranty or repair.
Attach original proof of purchase here!
Warnings & Notice 4
General Handling Cautions 5
Dangerous Procedures 5
Use of Safety Selector 5
Function Check 6
Safety Features 6
Sights 8-9
Loading a Magazine 10
Loading & Unloading the Rifle 10
Firing the Rifle 11
Maintenance 12-13
Cleaning the Rifle 14-15
Lubricating & Inspecting the Rifle 16-17
Assembly 18-19
Extreme Conditions 20
Troubleshooting 34-35
.22LR Caliber 21-27
Sights 22
Loading a Magazine 22
Loading & Unloading the Rifle 23
Firing the Rifle 24
Mounting Optics 24
Maintenance & Cleaning 25
Unusual Conditions 26
Troubleshooting 26-27
.30 Caliber 28-35
Loading the Magazine 29
Loading the Rifle 29
Unloading the Rifle 30
Firing the Rifle 30
Mounting Optics 31
Maintenance 31-32
Cleaning 32-33
Unusual Conditions 33
Trouble Shooting 34-35
Warranty 36
Alterations & Modifications 36
Returns 36
If this firearm is carelessly or improperly handled, unintentional discharge could result and could cause personal injury, death or damage to property.
FOR YOUR SAFETY AND THE SAFETY OF OTHERS, this Operations Manual contains important instructions, warnings and safety procedures that must be understood BEFORE using your DPMS/Panther Arms firearm. It is imperative that you read the ENTIRE MANUAL and if you do not understand any part of it or the operation of your DPMS/Panther Arms firearm, you should seek professional firearms instruction.
Children are attracted to and can operate firearms that can cause severe injuries or death. Prevent child access by always keeping guns locked away and unloaded when not in use. If you keep a loaded firearm where a child obtains and improperly uses it, you may be fined or sent to prison.
A los niños los atraen las armas de fuego y las pueden hacer funcionar. Ellos pueden causarse lesiones graves y la muerte. Evite que los niños tengan acceso a las armas de fuego guardándolas siemprecon llave y descargadas cuando no las este utilizando. Si usted tiene una arma de fuego cargada en un lugar en que un niño tiene acceso a ella y la usa indebidamente, le pueden dar una multa o
DPMS shall not be responsible for personal injury, death or damage to property resulting from either intentional or accidental discharge of this firearm, or from its function when used for purposes or subjected to treatment for which it was not designed. DPMS will not honor claims involving this firearm which result from careless or improper handling, unauthorized adjustment or parts replacement, corrosion, neglect, or the use of wrong caliber ammunition, other than original high quality commercially manufactured ammunition in good condition, or any combination thereof. DPMS will not honor claims involving this firearm for any reason or cause when the second or subsequent owner makes such claims.
Before the rifle left the factory, this firearm was tested, carefully inspected and packaged. DPMS cannot control product handling after it leaves the factory; therefore please examine this firearm carefully at the time of purchase to ensure that it is unloaded and undamaged.
Children are attracted to and can operate firearms that can cause severe injuries or death. Prevent child access by always keeping guns locked away and unloaded when not in use. If you keep a loaded firearm where a child obtains and improperly uses it, you may be fined or sent to prison.
ADVERTENCA
enviarle a la cárcel.
NOTICE
GENERAL HANDLING CAUTIONS
1. Do NOT alter or modify your DPMS/Panther Arms firearm, and have it serviced regularly!
2. Always handle your firearm as if loaded.
Dpms Panther Serial Number Lookup By Name
3. Never point your firearm at anything you don't intend to shoot.
4. Always make sure your firearm is not loaded and the bolt is latched open and to the rear before laying it down or handing it to someone else.
5. Never leave a loaded firearm unattended.
6. Always be sure bore, muzzle, chamber and action are clear of obstruction.
7. Always check that ammunition is clean and undamaged.
8. Never drink alcoholic beverages or take drugs before or during shooting.
9. Always wear eye and ear protection when shooting.
10. Always keep safety on 'SAFE' when firearm is loaded and a round is chambered until ready to shoot.
11. Never attempt to fire if water is in the bore.
12. Never indulge in 'horseplay' when holding your firearm.
DANGEROUS PROCEDURES
1. Be sure the cam pin is installed in the bolt group. If it isn't, your rifle can still fire but it could possibly explode, causing you personal injury or harm. (Applies only to the .308 caliber and 5.56/.223 caliber rifles, not the .22LR rifle.)
2. DO NOT exchange or switch bolt assemblies from one rifle to another. It could cause personal injury to you and others and damages to your rifle.
3. If your firearm fails to fire, hold it, keep it pointed towards the target and wait 30 seconds. If a hangfire has occurred, the round will fire within 30 seconds. If the round does not fire, remove magazine, eject round and examine the primer. If firing pin indent is light, misaligned or non-existent, have your firearm examined by a competent gunsmith. If firing pin indent on primer appears normal (in comparison to previously fired rounds) assume faulty ammunition; appropriately dispose of misfired round from other live ammunition; reload and resume firing.
USE OF SAFETY SELECTOR
A selector lever, located on the left of lower receiver, has two positions, 'FIRE' and 'SAFE'.
When set to 'FIRE' the firearm will fire a single shot each time the trigger is squeezed.
When set to 'SAFE' a cam bears upon the rear of the trigger, blocking movements and preventing the hammer from being released.
'SAFE'
Rifle will not fire. Selector lever cannot be on safe unless rifle is cocked. Always place on SAFE when loading and unloading.
'SAFE'
Rifle will not fire. Selector lever cannot be on safe unless rifle is cocked. Always place on SAFE when loading and unloading.
'FIRE'
Rifle will fire one round each time the trigger is pulled.
'FIRE'
Rifle will fire one round each time the trigger is pulled.
FUNCTION CHECK
SAFE Note: Remove magazine and make sure your rifle is unloaded and there is no ammunition in the chamber. Point in safe direction. Pull charging handle to rear and release. Place on safe. Pull trigger. Hammer should not fall.
FIRE Note: Remove magazine and make sure your rifle is unloaded and there is no ammunition in the chamber. Point in safe direction. Place selector on fire. Pull trigger and hold to rear. Hammer should fall. Pull charging handle to rear and release. Release trigger and pull again. Hammer should fall.
SAFETY FEA TURES
Disconnector
The disconnector, a part of the firing mechanism, prevents the firearm from firing full automatic. As the hammer is cocked after each shot the disconnector holds the hammer until the trigger is released. When the trigger is released, retention of hammer passes from disconnector to trigger ready for the next shot.
Firing Pin Collar
The bolt carrier assembly, located within the upper receiver, is designed to prevent the firing pin from striking a cartridge until the bolt is locked to the barrel.
The following sections contain caliber specific information. Please open to the section relevant to your particular rifle's caliber. If you are unsure of the caliber of the rifle, the caliber marking can be found on the barrel of the rifle, immediately in front of the gas block on the bottom of the barrel.
Everyone should read page 36 for additional information pertaining to the Three Year Limited Warranty and returns!
.204 Ruger 5.56 x 45mm 6.8mm Rem. SPC .223 Rem. 7.62 x 39mm
Includes the Following Rifles:
Panther LR-204 Pardus Rifle
Panther 20th Anniversary Rifle Panther Bull Sweet Sixteen Panther Bull Twenty Panther Bull Twenty-Four Panther Race Gun Panther Bull 24 Special Panther Super Bull 24 Arctic Panther Panther Tuber Panther Bull Classic Panther Lo-Pro Classic Panther DCM Panther Classic
Panther Classic Sixteen
Panther Lite 16
Panther Carbine
Panther A2 Tactical 16
Panther AP4 Carbine w/Miculek Comp
Panther AP4 Carbine
Panther 6.8mm AP4 Carbine
Panther 6.8mm 20' Rifle
Southpaw Panther
Panther Pump Action Rifle
Panther Pump Action Pistol
DPMS Single Shot AR Rifle
Panther Kitty-Kat
Panther 7.62 x 39mm
00 J
1. Rear sight can be adjusted for both windage and elevation and has a dual aperture peep sight, one for short range and one for long range.
2. When flipped forward, the aperture is marked O-2 for zero to 200 meters. When using this setting the elevation knob should be set at 8/3 low or 6/3 for detachable carry handle or flat top rear sights and at its lowest position.
3. When the aperture is flipped back, it is set for using the long range sight. When using this setting you can adjust the elevation knob for range required: 8/3 low for 300 m, 4 for 400 m, 5 for 500 m, 6 for 600 m, 7 for 700 m, and 8/3 high for 800 m. There are click settings in between for fine tuning.
Panther Arms Serial Numbers
4. The windage knob is located on the right side of the rear sight. To adjust for horizontal movement on target, turn knob clockwise for right and counter-clockwise for left.
5. The front sight is adjustable for elevation zeroing only, it is not used at any other time in firing.
FRONT SIGHT - To adjust elevation, depress detent, rotate post. To raise strike of bullet, rotate post in the direction of arrow marked up. Reverse the direction of rotation to lower strike of bullet. Each graduation (notch) moves the point of impact of bullet as indicated in chart.
ZEROING SIGHTS
This procedure is for .223 ammunition. For our rifles chambered in 7.62x39mm and 6.8mm SPC the trajectory will differ, please call DPMS with any questions. The procedure described is for zeroing at 25 meters but may be adjusted accordingly for longer ranges. The following table shows change of impact per click at specific range.
Windage:
25 m | 3/8 | in. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
100m | 1 3/8 | in. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
200m | 2 3/8 |
Was this article helpful? RecommendedRelated Posts
Related CategoriesGuns, Firearms, Rifle, Ruger, Firearms Instruction |