The purpose of this document is to detail the installation and configuration of an Uplogix Local Managers (LM) to facilitate remote connectivity to a KG Encryptor.
- Supports KG-175A Encryptors with Uplogix Local Manager
- Supports KG-175D Encryptors with Uplogix Local Manager with dedicated Ethernet card installed
KG-175A
Connect a free serial port on the Uplogix to the KG-175A’s RS-232 console management port with a standard Cat-5 cable and a RJ45-to-DB9 connector.
Operator and field maintenance manual for kg-175d taclane-micro in-line network encryptor (nsn 5810-01-547-4520) (eic: n/a) (this item is included on em 0242) Unit Of Issue(s) BK. TACLANE-Classic and E100 encryptors may be traded in for a new TACLANE-Micro for $6,950. TACLANE-Micro is managed by GEM-X ®, the latest in encryptor management which allows users to remotely manage up to 500 TACLANE network encryptors. Users that upgrade to TACLANE-Micro do not require any additional operator training, as the menu. Read Book Taclane 175d Taclane 175d When people should go to the books stores, search commencement by shop, shelf by shelf, it is in fact problematic. This is why we give the books compilations in this website. It will certainly ease you to see guide taclane 175d as you such as.
KG-175D
Connect the Uplogix LM’s corresponding Ethernet port to the KG-175D’s front-panel-mountedEthernet Port provided for the Console with a standard Cat-5 cable.
A dedicated Ethernet connection is required for Ethernet port forwarding. This type of connection is supported on an Uplogix LM with an installed dedicated Ethernet card.
KG-175A
To configure the LM for connection to a KG-175A, run the command config init and follow the prompts as below:
The default console settings for the KG-175A are 9600 bit rate, 8 serial data bit, no serial parity, serial stop bit 1, no flow control.
KG-175D
To configure the Uplogix LM for connection to a KG-175A, run the command config init and config protocol forward and follow the prompts as below:
To configure the Local Manager to pass web traffic to the KG-175A’s web interface, run the config protocol forward command as below and enter dedicated 80 http to set the TCP port to which traffic will be passed on the device’s dedicated IP address (172.16.0.1, entered above).
KG-175A
Taclane Micro Kg 175d Encryptor
To connect to the serial console of the KG-175A, first connect to the Uplogix LM using SSH, navigate to the port that the KG-175A is connected to, and use the terminal command. When finished, use ~ to disconnect.
KG-175D
The methodology for connecting to the web interface of a KG-175D varies slightly depending on the SSH client being used.
To use the SSH applet in the Uplogix Control Center’s GUI, click the CLI button for the Uplogix LM, log in with valid credentials, click Terminal > Forward, click the check box next to the KG-175D’s port, then click Apply.
Taclane 175d Manual Software
A connection to the KG-175D’s web interface can now be achieved by opening a web browser on your workstation and entering 127.0.0.1:[port] in the address bar, where [port] is the port highlighted in green (6252 in the above example). The port is selected randomly when Apply is pressed, but can also be set manually by entering a port number and pressing Apply.